THE COLLECTION
Profiles that finish the room.
Discover crown moulding and ceiling systems designed to bring balance, definition, and character to your interior.
Crown moulding
Explore our crown moulding planning guide for help choosing profiles, planning installation, and preparing a project quote.
All profiles are available in nominal sizes from 4″ to 14″ and lengths up to 8 feet, with a sandable, paintable finish.
Jump to a profile: One Step Cove · Two Steps Cove · Georgian · Symmetrical · Cove · Deco · M-007 · IN-028 · Extended collection
Need help choosing a size?
Reading the crown profile images: Drop (D) is measured vertically down from the ceiling; projection (P) is measured horizontally out from the wall. Some original drawings and the reference catalogue use the older H/D labels: H means wall drop and D means ceiling projection. Use the dimension names when reading those drawings. These installed dimensions differ from the nominal profile size. For ceiling beams, use the width and depth dimensions listed with each beam.
Use these suggested nominal size ranges as a starting point, then compare the profile in your room.
| Ceiling height | Sizes to compare |
|---|---|
| 8 feet | 4″–6″ |
| 9–10 feet | 6″–9″ |
| 11–12 feet | 8″–12″ |
| Above 12 feet | 10″–14″ |
These are design suggestions, not fixed rules. Room width, profile shape, adjoining trim, and clearance above doors and cabinets also matter. The nominal size label is not the installed wall drop or ceiling projection: wall drop measures vertically down from the ceiling, while projection measures horizontally out from the wall. Check both on the dimensioned profile drawings for your selected size.
Read our crown sizing guide, or choose “I need help choosing” on the quote form and send your ceiling height and room dimensions.
Explore the extended crown collection
Four more profiles for a particular architectural character. M-004, Milan, Tuscany and CI-805 are available to order alongside our featured eight.
Select your preferred profile on the quote form and include the size and quantity you need. We can help compare the profiles shown here and confirm wall drop, ceiling projection and pricing.
Ceiling beam profiles
Read our coffered ceiling beam guide for layout considerations, material details, and answers to common project questions.
Create a coffered ceiling with beams featuring pre-attached mouldings. Beams without mouldings and custom profiles are also available. Explore the six profiles below, then include the profile code and quantity in your quote request.
Available in 8-foot lengths with a sandable, paintable finish. A dimensionally stable polystyrene core and flexible plaster coating work together to help resist cracking under normal interior conditions. The core also resists rot and humidity-related swelling and warping. Designed for interior use.
Compare beam dimensions
All listed beams are supplied in 8-foot lengths. Select a profile code to see its drawing and request a quote. Tap any drawing to enlarge it.
Dimensions shown are taken from the original profile drawings. Confirm your selected profile, dimensions, and availability with NovaCrown before ordering. 3D renderings, technical information, and CAD files are available upon request.
Beams without mouldings & custom profiles
For a different ceiling layout or a beam without pre-attached mouldings, share your room dimensions, preferred beam size, quantities, and delivery postal code. We’ll help you explore the appropriate solution.
THE MATERIAL MAKES THE DIFFERENCE
A plaster finish.
A simpler installation.
Some materials offer lightweight handling. Others offer a plaster surface. NovaCrown brings both together—with adhesive installation and joints that can be filled, sanded and blended into the finished detail.
THE SURFACE
A refined plaster finish.
A flexible plaster coating with a sandable, paintable surface.
THE INSTALLATION
Adhesive. No permanent nails.
Bond to prepared surfaces without locating studs.
THE HANDLING
Architectural detail. Easier handling.
A dense polystyrene core keeps profiles lightweight.
Compare crown moulding materials
The main differences lie in handling, installation and finishing. Compare the features that matter to your project.
| Benefit or feature | MDF | Wood | PVC | Traditional plaster | Uncoated polystyrene | NovaCrown |
|---|---|---|---|---|---|---|
| Adhesive installation with no nail holes to fill or sand | Varies | Varies | Varies | Varies | ✓ | ✓ |
| Lightweight overhead handling and one-person installation | Varies | Varies | Varies | × | ✓ | ✓ |
| Installation without locating studs | Varies | Varies | Varies | Varies | ✓ | ✓ |
| Adhesive installation on prepared concrete and drywall over steel studs | Varies | Varies | Varies | Varies | Varies | ✓ |
| A dimensionally stable core and flexible plaster coating that help resist cracking | × | × | × | × | × | ✓ |
| Resists humidity-related swelling and warping | Varies | Varies | ✓ | Varies | ✓ | ✓ |
| Rot-resistant material | × | Varies | ✓ | ✓ | ✓ | ✓ |
| Smooth, paintable surface | ✓ | ✓ | ✓ | ✓ | Varies | ✓ |
| Sandable plaster finishing surface | × | × | × | ✓ | × | ✓ |
| Joints finished with compatible drywall compound | Varies | Varies | Varies | Varies | Varies | ✓ |
| Supplied in lengths of 8 feet or less for tight interiors | Varies | Varies | Varies | Varies | ✓ | ✓ |
| Available in lengths longer than 8 feet | ✓ | ✓ | ✓ | ✓ | Varies | × |
| Natural wood grain for staining (stain-grade wood) | × | ✓ | × | × | × | × |
Comparison details
NovaCrown’s rot-resistant polystyrene core resists humidity-related swelling and warping under normal interior conditions. The dimensionally stable core and flexible plaster coating work together to help resist cracking. Correct bonding and joint finishing remain essential. Moisture resistance varies among wood species, MDF grades and plaster systems. PVC and uncoated polystyrene also resist rot and humidity-related swelling. These distinctions do not imply waterproofing or eliminate movement at joints.
Uncoated foam crown commonly uses adhesive without stud finding and is supplied in short, lightweight lengths. A suitable foam-safe adhesive must also be approved for the selected substrate; concrete adhesion depends on surface condition and the adhesive system. Foam joint fillers may be spackle or caulk rather than drywall joint compound. PVC offers smooth, paintable profiles, but paint and joint products must be compatible with the selected PVC system. Wood, MDF, PVC and traditional plaster are available in lengths exceeding 8 feet; available sizes depend on the supplier and profile.
NovaCrown’s adhesive installation suits prepared concrete surfaces and drywall over steel studs, without requiring timber backing for permanent nailing. MDF may require different adhesives, fasteners or backing depending on the product and wall construction.
MDF crown is available in longer lengths, which can reduce the number of joints on long runs. NovaCrown lengths are up to 8 feet, making them easier to manoeuvre through many elevators, stairwells and tight interiors. Check actual access clearances. Lightweight foam and NovaCrown profiles can make one-person installation practical; profile size, access and site conditions may still call for assistance. MDF typically has a factory-primed surface. NovaCrown has a smooth, sandable plaster coating ready for painting.
Lightweight MDF products exist. Adhesive-only MDF installation and fastening without locating studs depend on the profile, substrate and manufacturer’s instructions. MDF joints can also be filled and sanded; use a filler or compound approved for the selected product. NovaCrown’s coating supports finishing with compatible drywall compound. All installations still require accurate cutting, sound surfaces and appropriate joint preparation.
A guide to common interior crown moulding options, not a rating of every product. Weight depends on profile size and construction. “Plaster” means traditional cast / fibrous plaster, not lightweight paper-faced cove. “Uncoated polystyrene” means basic foam profiles without a plaster coating; engineered polymer systems may differ. Check the selected manufacturer’s installation instructions.
NovaCrown is for interior use. Install on clean, dry, sound surfaces. All materials still require accurate cutting and appropriate joint finishing.
The advantage is in the combination.
A plaster-coated surface. A lightweight core. A finish that fits the drywall workflow. NovaCrown is designed to make a refined architectural result simpler to achieve.
How to read this comparison & reference sources
These are qualitative material and installation distinctions—not independent laboratory rankings. NovaCrown characteristics reflect its published product and installation guidance. Different systems within a material family may perform differently. Adhesive-only installation for wood, MDF, PVC and plaster is marked “Varies” rather than impossible; follow the specific product instructions. The natural-grain row deliberately credits stain-grade wood.
- NovaCrown: material, installation and finishing guidance
- Woodhouse: MDF mouldings technical guide
- AZEK: PVC trim and moulding installation resources
- Hodkin & Jones: traditional fibrous plaster lengths, fixing and jointing
- Decorative Ceiling Tiles: uncoated foam, weight and glue-up installation
- Orac: engineered polystyrene systems differ from basic uncoated foam
- Decorative Ceiling Tiles: foam crown adhesive installation, stud finding and joint fillers
- AZEK: PVC crown profiles and lengths
- Metrie: 16-foot wood crown
- Metrie: 16-foot MDF crown
Plan your project.
Choose your crown moulding or ceiling beam profile, then use the installation guides below to plan the next steps.
Technical resources
Prepare clean, dry, sound contact surfaces free of dust or loose material. Recommended bonding materials include drywall joint compound, DAP Alex Plus acrylic latex caulk, and PL Premium construction adhesive. Use standard NovaCrown installation methods, including on concrete surfaces and in steel-stud construction. Refer to the ceiling beam installation guide for installation reference.
Download the current reference documents below. Confirm the selected profile, dimensions, availability, and installation requirements with NovaCrown before ordering.
Dimensioned Profile Catalogue (PDF)
Cross-section drawings with profile dimensions.
Crown Moulding Installation (PDF)
Step-by-step installation and finishing guidance.
Ceiling Beam Installation (PDF)
Photo reference for ceiling beam installation.
Need a detail or CAD file? Include your requirements in your quote request.
HELPFUL DETAILS
Frequently asked questions
Practical answers to help you choose, plan, and finish your architectural ceiling system. Select a question to read more.
What are NovaCrown profiles made from?
NovaCrown profiles have a dense polystyrene core with a proprietary flexible plaster coating. This creates lightweight architectural detail with a sandable, paintable surface that can be finished to blend with the surrounding walls and ceiling.
How are the profiles installed? Do they need nails?
NovaCrown is designed for adhesive-based installation without permanent nailing or locating studs. Prepare clean, dry, sound contact surfaces. Recommended bonding materials include drywall joint compound, DAP Alex Plus acrylic latex caulk, and PL Premium construction adhesive. Follow the relevant installation guide in the Technical resources section above. The same standard NovaCrown installation methods apply to concrete surfaces and steel-stud construction.
Can NovaCrown be installed in an existing home?
Yes. Profiles can be installed on suitable finished drywall for renovation projects, or installed alongside drywall and mudded at the same time. They can accommodate minor surface irregularities, but loose finishes and significant unevenness should be corrected first. The same standard NovaCrown installation methods apply to concrete surfaces and steel-stud construction.
How are joints finished, and can the profiles be painted?
The plaster-coated surface can be sanded and painted. Joints and transitions are filled, smoothed, and finished as part of the installation to create a continuous appearance. Follow the installation guide for filling, sanding, and surface preparation, then use a compatible interior paint. Flat or low-sheen finishes can help emphasize the profile’s shape.
Are the profiles suitable for kitchens and bathrooms?
Yes, for normal interior kitchen and bathroom conditions with appropriate ventilation. NovaCrown is intended for interior architectural detailing, not exterior use or locations exposed to direct water. Contact us before specifying it in a wet area or a space with unusual moisture conditions.
What lengths, sizes, and custom options are available?
Profiles are supplied in lengths up to 8 feet. All crown moulding profiles are available in sizes from 4″ to 14″. Beam dimensions are shown in the catalogue above. Custom profiles and beams without pre-attached mouldings are also available. Share your room dimensions, ceiling height, and design direction so we can help confirm a suitable option and its availability.
Are the ceiling beams structural?
No. NovaCrown ceiling beams are decorative architectural components used to create coffered layouts and ceiling definition. They do not replace structural beams or support building loads. Plan the layout around lighting, vents, and other ceiling services before installation.
How do I request pricing and delivery?
Use our quote-request form to provide your selected profile names or beam codes, preferred sizes, quantities in linear feet, contact details, and delivery postal code. Include room dimensions in your project details if you need help planning quantities. We’ll confirm specifications, availability, product pricing, and a project-specific shipping quote before you place an order.
Still have a question? Contact NovaCrown for guidance on your project.

















