14 Foot pieces iNSTALLED BY ONE PERSON

how to cut novacrown

how to apply adhesives to novacrown mouldings

introduction

how to install novacrown mouldings

NOVACROWN TOOLKIT

THINGS YOU WILL NEED

image80

 1. UTILITY KNIFE

Use a sharp knife to remove the fuzziness and a sliver of the NovaCrown mouldings on the back side of each cut. 


2. ALEX PLUS LATEX CAULKING PLUS SILICONE

Apply beads to the inner edges of the contact shoulders on the backside of the mouldings. 

Apply to styrene ends of butt joints for mid wall joints. 

Apply a very small bead of latex caulk to fill remaining gaps between mouldings and wall/ceiling.


3. NO MORE NAILS CONSTRUCTION ADHESIVE

Use 'NoMoreNails' to adhere the styrene ends of inside corner pieces.


4. POLY FILLA

Use Poly Filla to adhere the ends of outside corner pieces. Poly Filla can be sanded so it's great for outside corners.


5. PUTTY SCRAPER

After the mouldings are attached gently glide scraper over wall and/or ceiling to gently remove any caulking squeeze-out. 


6. SPACKLE

Spackle can be applied to the outside of mid wall joints and then sanded when dry.


7. 120 GRIT SAND PAPER


8. CLOTH OR PAPER TOWEL


9. GOOD QUALITY CAULKING GUN


10. A COMPOUND MITRE SAW IS ALSO RECOMMENDED

NEW SUSPENDED CEILING SHOWCASE VIDEO

ceiling tiles

HOW DOES IT LOOK?

Drop us a line, show off your installation and get featured!

show us